Shenzhen Daceen Technology Co., Ltd.
Shenzhen Daceen Technology Co., Ltd.
Model No.: 12V iMC300Ah
Color: Army Green/Black/Customized
Charger Voltage Of Battery: 12V
Maintenance Charging Cells Qty: 4 Cell 12V Cells
Battery Maintenance Charged Type: Cells Repaired Separately Not Battery Bank Repaired
Battery Repair Cycle Time: 3~7 Days Or Long-term Charging Link Without Damaged
Maintenance Charging Battery Spec.: 12V36Ah~300Ah
Maximum Power Consumption: Charge≤360W; Maintenance≤36W
Warranty: 2 Years
Brand: iM PULSE
Place of Origin: SHENZHEN, CHINA
Supply Ability: 36000PCS/Year
Certificate: CE, ROHS,ISO
HS Code: 8536300000
The 12V Battery iCharging Maintainer can produce continuous pulse wave resonance. Through continuous pulse disturbance, this kind of 12V Intelligent Charging Maintainer can effectively remove the minor lead sulfate crystals formed and can effectively prevent generation of crystallization sulfide, so that battery plate is always new and under efficient working condition. The tiny pulse current can also offset the self-discharge of battery, and ensure that the battery can be put into normal use at any time no matter how long it is stored. To reduce the charging links of the battery to be sealed, after removal from various military equipment, the batteries can be directly connected to 12V Intelligent Charging Maintainer, which will enter pulse maintenance state after fully charging the battery.
We developed the high-tech Battery Charger And Restorer 2-in-1 for capacity recovering of early failure lead-acid battery due to irreversible sulfation and puts forward a battery charging and recovery method that generates smart frequency electronic impulse oscillation based on the MCU intelligent control principle, so as to refine and dissolve the lead sulfate on the surface of electrode, reduce the Internal Resistance(IR) in battery, improve the charging efficiency of electrode and recover the battery capacity just like Battery Life Saver. The 12V Cell Maintenance Charger of lead-acid battery based on the electronic smart charging pulse principle has practical significance for prolonging the battery service life, improving the battery capacity and reducing the military expenditure waste caused by the excessive waste of lead-acid battery. Long-term and a large amount of application tests have been conducted on repairing different failure batteries, the test result shows that the early failure battery due to long-term unused and improper use or maintenance can be repaired effectively.
It is applicable to various types of 12V/36 to 300Ah lead-acid batteries
THE RIGHT CONNECTION METHODS
There are 2 ways of connection methods as below:
1) 12V Cell single connection: You can use your Smart Battery Management System of 12V iMC300Ah to pulse maintain your batteries
2) 12V Cells packed in series by 2 PCS 6V Cells: You can use your Smart Battery Management System of 12V iMC300Ah to pulse maintain your batteries
But if the 12V Cells packed in series more than 3 PCS Cells, The effectiveness cannot achieve your expectations.
THE WRONG CONNECTION METHODS
Some wrong ways of connection example as bellow, you should avoid it or destroy your device.
This 12V Battery iCharging Maintainer--12V iMC300Ah has a warranty period of 2 years. For users who use the system normally according to this instruction, if the equipment malfunctions, the users can send the equipment voucher and the equipment to the manufacturer within one year after purchase, and can get the maintenance for free. For all repairs and maintenance, their performances are inspected by the factory product.
For users who fail to use equipment in accordance with this manual and cause damage to the equipment or exceed the warranty period, they may send the equipment to the manufacturer, charge for maintenance and charge only the material expenses. For all repairs and maintenance, their performances are inspected by the factory product.