Shenzhen Daceen Technology Co., Ltd.
Shenzhen Daceen Technology Co., Ltd.
24V Battery IMaintaining Charger,24V Battery ICharging Maintainer,24V Intelligent Charging Maintainer
Model No.: 24V iCM300Ah
Color: Army Green/Black/Customized
Charger Voltage Of Battery: 24V
Maintenance Charging Cells Qty: 4 Cell 24V Pack: 2PCS 12V Cells Series
Battery Maintenance Charged Type: Cells Repaired Separately Not Battery Bank Repaired
Battery Repair Cycle Time: 3~7 Days Or Long-term Charging Link Without Damaged
Maximum Power Consumption: Charge≤420W; Maintenance≤40W
Maintenance Charging Battery Spec.: 24V36Ah~300Ah
Brand: iM PULSE
Place of Origin: SHENZHEN, CHINA
Supply Ability: 36000PCS/Year
Certificate: CE, ROHS,ISO
HS Code: 8536300000
The main cause of battery failure is that the lead sulfate on the battery plate gradually loses its activity, crystallizes, thickens and hardens under the action of the above factors and generates "sulfurization", which makes the battery difficult to charge, reduces the capacity or is completely scrapped. This is the problem can be solved by our technology of 24V Intelligent Charging Maintainer. It is applicable to various types of 24V/36 to 300Ah lead-acid batteries,which the 24V Cells packed in series by 2 PCS 12V Cells or in series by 3 PCS 8V Cells.
Battery is one of the important power sources of the vehicles and weapon systems in our army. How to ensure the battery's good performance in standby state and put it into training and combat use at any time is an important subject for the equipment support. However, due to the under-charging, over-discharge, self-discharge, improper daily maintenance and bad using environment, most batteries cannot be used for more than two years or even completely scrapped without our 24V Cell iCharging Maintainer.
Due to the early effectiveness of the battery, it is inevitable that the military vehicles and equipment of our army will not be able to meet the emergency start-up needs to carry out combat tasks in the event of sudden war or emergency tasks. In order to maintain and prolong the service life and good performance of our army's battery, our company developed a set of multifunctional module centralized maintenance and guarantee system which named 24V Battery iCharging Maintainer as well as you can call it 24V Battery iMaintaining Charger, to solve the fatal defect of battery pole plate sulfation and the problems caused by it. The system integrates the functions of non-destructive pulse repair, pulse maintenance charging into a whole and forms a standardized maintenance process emergency start-up application so as to reduce the working hours of maintenance personnel, greatly extend battery life, improve the performance, safety and reliability of the battery to the maximum and meet the needs of emergency tasks.
It is applicable to various types of 24V/36 to 300Ah lead-acid batteries
THE RIGHT CONNECTION METHODS
There are 2 ways of connection methods as below:
1) 24V Cells packed in series by 2 PCS 12V Cells: You can use your 24V Cell iCharging Maintainer of 24V iCM300Ah to pulse maintain your batteries
2) 24V Cells packed in series by 3 PCS 8V Cells: You can use your 24V Cell iCharging Maintainer of 24V iCM300Ah to pulse maintain your batteries
But if the 24V Cells packed in series more than 3 PCS Cells, The effectiveness cannot achieve your expectations.
THE WRONG CONNECTION METHODS
Some wrong ways of connection example as bellow, you should avoid it or destroy your device.
This 24V Cell iCharging Maintainer has a warranty period of 2 years. For users who use the system normally according to this instruction, if the equipment malfunctions, the users can send the equipment voucher and the equipment to the manufacturer within one year after purchase, and can get the maintenance for free. For all repairs and maintenance, their performances are inspected by the factory product.
For users who fail to use equipment in accordance with this manual and cause damage to the equipment or exceed the warranty period, they may send the equipment to the manufacturer, charge for maintenance and charge only the material expenses. For all repairs and maintenance, their performances are inspected by the factory product.