2V Battery Pulse Restore
System fully take into account the inconsistent of the physical resonance frequency
between lead sulfate crystal and battery plates, select the optimal frequency of pulse waveform and pulse current intensity to "break" and "decompose" the lead sulfate crystals
, ensure the best restoration effect of sulfide battery without any damage to the plates.
Off-line 2V Battery Smart Pulse Restore
System, also be called Battery Reconditioner
or Battery pulse maintainer and Reviver
: mainly used in the whole industry of Electric Forklift power battery
, Sightseeing car power battery, Golf Cart battery
, Wind and Solar energy storage battery
, UPS Back up power system
, Telecom base site battery
, State Grid and Military battery for Sudden affair
The system is composed of 3 parts and a professional standard restore process: 1) 2V Battery Restorer Device(100~3000Ah); 2) 2V Battery Digital Pulse Charger; 3) 2V Battery Discharge Tester. Lead-Acid Battery Restoration system and Solution is applicable to all of Lead Acid Battery(AGM, GEL, VRLA, MF, Flooded
, Dry, Traction, Deep cycle and Stationary
), and widly used in 2V (200~3000Ah) cell batteries.
1. The smart pulse with fast rising front is resonant with the crystal of lead sulfate to dissolve the large lead sulfate crystal
under the action of charging pulse, which can improve the capacity and prolong the service life
of the battery.
2. No need to add any chemical additives, does not change the internal electrolyte composition of the battery, safe and reliable; For water loss batteries only need to add deionized water
before restoring. The output pulse voltage and pulse current are strictly limited.
3. 12 independent output, can repair 12PCS 2V/100Ah-3000Ah cells at the same time without interference. Each group is equipped with a separate voltmeter to monitor the voltage of the repaired battery in real time.
4. Each system is equipped with "capacity selection" gear, according to the different capacity of the battery to select the appropriate gear, can be ensure better protection of battery plate in restore working.
5. Each system is provided with automatic repair function, automatic repair system will smartly adjust the pulse duty ratio based on the receptivity of the battery without anyone on duty
6. Each system is equipped with "High resistance repair" function, select the high resistance repair, specially for the long term stored batteries, even if the OCV is 0 Volt, but also can be easily activated.